- Home
- PRODUCTS & SERVICES
- MAINTENANCE & PARTS
Old Machine Repair & Retrofitting
Services Available Include:
This allows full control by the blaster himself without assistance from others to begin the air line, turn on the grit valve, shutting off the grit valve only & finally shut off the air supply.
We can provide non-destructive dust free wet blast reconditioning equipment for such cleaning purposes.
Model DB225 Blast Tank Specification Includes:
Services Available Include:
- Inspection of old machine to identify repair works needed
- Submission of Repair, Reconditioning or Retrofitting Proposal
- Provision of new parts & equipment + Electrical Works Repair/Fittings
- Carry out works inside our shop as well as at site where suitable
- Test running of completed works to achieve blasting quality expected
- Technical documentation & handing over equipment to client
WEBLAST has in stock a wide range of parts needed for blasting machine;
- The main blasting cabinet
Blast lining manganese steel plates, high chromium steel fastener, rollers, cabinet seal, rubber curtain or polycarbonate fingers
- The blast Wheel Units
Consisting of the motor, housing, side liners, end liners, top liner, blade cage, wheel blades, control tube, impeller, feed chute, abrasive valves and abrasive hose
- The Material Handling Conveyor
This could be rollers, overhead chain hangers, motor & drives mechanism, belts, chains
- The Abrasive Recovery System
The screw conveyors, bucket elevator, air wash separator, rotary screen
- The Dust Collector
Ventilation design and collector sizing with full range of parts; sock type filter bags, filter cartridges, diaphragm valves, reverse pulse jet cleaning & timer control panel, duct works, centrifugal fan, rotary gate valves
- The Control System
The electrical control design, provision of component parts in combination of pneumatic system and hydraulic system where it is needed
Dust Collectors
Conventional Cartridge Collector
.png) Model CDC4 |
 Model CDC18 |
Model CDC Dust Collector
CDC4 2000CFM 3HP
CDC6 3000CFM 5HP
CDC8 4000CFM 7.5HP
CDC12 6000CFM 10HP
CDC18 9000CFM 15HP
CDC24 12000CFM 20HP
CDC36 18000CFM 30HP
|
|
.png) |
Filter Cartridge Type
Eg. CDC4 = 4 Cartridges
Cartridge Model 660FA325
Height 660mm x Diameter 325mm
Filter Efficiency 90-95%
Automatic Pulse Jet Reverse Filter Cleaning System
|
||
Down Flow Type Cartridge Collectors
| Model | CFM | HP |
|
2DF8 3DF12 3DF16 3DF24 3DF36 |
4450 5750 7670 9300 14000 |
7.5 10 15 20 25 |
|
Model Naming, Eg. 2DF8 = 2 rows 8 cartridges Cartridge Code 660DO325 size 660mmH x Diameter 325mm Filter efficiency 90-95% Automatic pulse jet reverse filter cleaning system installed |
||
Sock Type Filter Bag Dust Collector
Model FbDc Filter bag type collector installed for blasting rooms
Full Line Supplies for your own DIY needs;
|
|
Design sized to meet your specific required air flow capacity.
DIY Your Own Blasting Equipment
Buy Parts From Us!
We represent WEBLAST & WBM
In provision of parts & technical support sales
We are FULL-LINE SUPPLIER for all items you may need to build a machine type Rotary Table, Tumblast, Spinner Hanger, Monorail, Roll-Conveyor, Skew-Roll Pipe, Suction Blast Cabinet, Air Filters, Automated Components & Electrical Control system or components. Call Us to Discuss Your Needs
Centrifugal type wheel that does the propelling of abrasive at a continuous high speed stream of shots hitting the material surface resulting in surface cleaning, was invented in the early years of 1900.
Centrifugal type wheel that does the propelling of abrasive at a continuous high speed stream of shots hitting the material surface resulting in surface cleaning, was invented in the early years of 1900.
The blast wheel has since been redesigned and fine tuned many times in application methods and advancing material technology. The nature of severe wear and tear in abrasive blasting requires the wheel component to be made durable for a reasonable operation time before changing the parts.
Each blast wheel cleaning capacity is defined by its related horsepower rating. WEBLAST can supply the full range that might be needed for a job. Generally, we recommend the sizes below:
Call us to find out what horsepower of the blast wheel is suitable for your application.Each blast wheel cleaning capacity is defined by its related horsepower rating. WEBLAST can supply the full range that might be needed for a job. Generally, we recommend the sizes below:
| HP | 5.5 | 10 | 15 | 20 | 25 | 30 | 50 |
| Kw | 4 | 7.5 | 11 | 15 | 18.5 | 22.5 | 37.5 |
Buying Parts for DIY Projects
We show you a partial list of items needed for your DIY projects here.
.png)
.png)
.png)
.png)
.png)
Blast Pots & Related Parts
.png)
.png)
.png)
Blast pots are pressurized, tank like containers, filled with abrasive material, used to allow an adjustable amount of blasting grit into the main blasting line.
We are importing all items suitable for your application. Call us to check on stock available.
The most productive combination of parts for a blast pot assembly allows for shut-off of compressed air and abrasive grits separately. A handy radio signal button switches control such,
| Button Combination | Air Valve | Grit Valve |
|
0 0 1 0 1 1 |
Off On On |
Off Off On |
This allows full control by the blaster himself without assistance from others to begin the air line, turn on the grit valve, shutting off the grit valve only & finally shut off the air supply.
The abrasive valve has a full adjustment range for abrasive flow from very small to maximum. It also means the possibility of changing blast gun size with a smaller hose for different types of work. Allowing full capability in a single blast pot combination.
Wet Blast Cleaning
Do you have soiled & dirty equipment such as an excavator or truck that requires old paint removal for recoating works?
We can provide non-destructive dust free wet blast reconditioning equipment for such cleaning purposes.
Model DB225 Blast Tank Specification Includes:
|
|
| Other model DB500 etc of bigger capacity | |
Summarized Product Brochures
Machine Retrofit
CDCseries
Down Flow Type Dust Collector
Filter Bag Dust Collector
Machines DIY
Machines DIY Parts 1
Blast Pot & Parts
Wet Blast Apply
Airblast Cabinets
